L-3-communications X200xp Uživatelský manuál

User Manual

10• Holding the Camera ⇒ The Camera can be mounted to a tripod using the 1/4-20 insert. ⇒ The Camera can be held either right-handed, or lef

11• Loading the Batteries Open the battery Door Unscrew Battery Door knob Counterclockwise Open the door to install batteries Install 2 AA B

12 Close the battery Door Close the Battery Door Screw Battery Door Knob Clockwise Batteries ⇒ The camera will operate from several battery ty

13 Batteries ⇒ When replacing batteries, always replace BOTH batteries. Mixing a fresh battery with a partially discharged battery is potentially

14camera will shutter only if it’s internal temperature changes by 100c or more. Automatic Contrast Video contrast is constantly adjusted either hig

15 • Adjusting the Display Brightness Turn the on/off knob past the on/off detent, continuing to increase the LCD display brightness. Brighter

16• Focusing for Close-up Operation The X200xp has overall viewing range from 15ft to infinity. In the Far Focus position, objects from 15ft to in

173. Accessories Contact L-3 Communications Infrared Products, for accessories that are approved for use with your X200xp Camera. • Accessory Vid

18 AC/DC Power Adapter Connect the AC/DC Power Adapter to the X200xp Connector labeled “Power”, and to AC power (wall outlet). Connecting the AC/DC

194. Additional Information • Specifications Detector Type Amorphous-Silicon Microbolometer Spectral Response 7 to 14 microns Thermal Perform

2

20Physical Size 5 ¼ x 4 ½ x 2 (inches) 13.4 x 11.4 x 5.1 (cm) Weight 13oz. (381g) with batteries Eye Cup Integral to camera; with 2” eye relief Env

21• Frequently Asked Questions Q1 Can different battery types be used? A1 As long as the battery is an AA size, the user can install Alkaline, Ni

22• Trouble Shooting Guide Problem Possible Cause Possible Remedy After waiting the 3 seconds of warm up, the video does not appear, but the logo

23Problem Possible Cause Possible Remedy The Battery Gauge shows empty External power is connected to the camera. When external power is connected

24 L-3 Communications Infrared Products • Warranty Product(s) will conform to L-3 IP’s current drawings and specifications at the time of delivery

25 IN NO EVENT SHALL L-3 IP OR ITS LICENSORS BE LIABLE FOR INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS, LOSS OF USE OR DATA OR INT

26HOW TO RETURN PRODUCTS FOR WARRANTY REPAIR: 1. Return the product to your Authorized Dealer. The Dealer will notify the service department by tele

27

28 L-3 Communications Infrared Products Customer Service Department 13532 North Central Expressway, MS 37 Dallas, Texas 75243 800-

3 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limi

4 User Manual P/N 7070431 ©2005 L-3 Communications Infrared Products. All Rights Reserved Patents This product is cove

5 1. Introduction ... 6 • Welcome to Infrared...

6 1. Introduction Thank you for choosing the X200xp Thermal Imaging Camera. With its small size, rugged design, and simplicity, you can now focus o

7 The X200xp was designed to sense differing amounts of long wavelength infrared coming from the various areas of a scene and to convert them to corr

8 • Handling & Precautions ⇒ All batteries can cause property damage or bodily injury if a conductive material such as jewelry or keys touch

9 2. Operation • The X200xp Thermal Imaging Camera Rubber Armored construction Submersible to 3 meters Floats in water